Quick answer
How to measure for a lehenga starts with three skirt figures: the waist where the band will sit, the fullest part of your hips, and the length from that waistline to the floor in the heels you plan to wear. For the choli, add bust, below bust, shoulder, sleeve, neck depth and blouse length. If you are buying or selling preloved, take finished garment measurements as well, and never treat those numbers as the same thing as body measurements.
A lehenga is two pieces, so measure the skirt and the choli separately. The size guide is a UK and South Asian conversion chart, not a tutorial. Use this lehenga measurements guide first, then the chart, and prefer exact measurements over a label size. Browse lehengas and bridal once you have your numbers.
7 steps for how to measure for a lehenga
Step 1: Get ready, and decide why you are measuring
Use a soft dressmaker's tape, not a metal DIY tape, and write inches or centimetres beside every figure. Wear the bra you will wear with the choli, stand on a level floor, and keep a full-length mirror nearby.
How to take measurements for a lehenga depends on the job. A tailor needs your body measurements at the wearing position. A listing needs the finished measurements of that garment. A buyer needs both, clearly labelled.
Step 2: Separate body measurements from finished garment measurements
A body measurement goes around you. A finished garment measurement describes the sewn piece. For girth, lay the garment flat, measure straight across the waistband or bust, and double it. For length, measure from the top of the waistband to the hem, or from the shoulder to the blouse hem.
A finished waist with your exact body number can feel tight if there is no stretch, so label which kind of figure you are using. Note whether the waist is hooked, zipped, elasticated or tied with a dori, and whether the blouse has spare seam. The size guide already warns that South Asian sizing varies by designer and region, so a UK 12 or a size 40 on a label is not enough.
Step 3: Measure the lehenga waist and hips
Decide where the skirt will sit before you wrap the tape. Some lehengas sit at the natural waist, others higher or lower on the hip. Measure at that wearing position, not only at the narrowest point, and write down where the line is. Stand straight, breathe normally, and do not hold your stomach in. Keep the tape snug and level, not tight. Then measure the hips at the fullest part of the seat, feet together, tape parallel to the floor.
Step 4: How to measure lehenga length, including heels, petite tips and a cancan
How to measure lehenga length is the figure people most often get wrong. Measure from the chosen waistband position down to the floor, standing in the heels you will wear. If you have not chosen shoes yet, measure barefoot and write the heel height you are assuming.
If you are petite, ignore charts that offer one length for one height. Take your own waist-to-floor measurement in the shoes you will wear.
A cancan or net underskirt holds the skirt away from the legs, so a straight drop can come up short. If you have the cancan, put it on and measure over it in your heels; if not, note that the length was taken without one. The South Asian outfits guide is useful here: the choli has to fit and the skirt is more forgiving, but a bordered hem is difficult to alter.
Step 5: How to measure for a lehenga choli and blouse
How to measure for a lehenga choli, and how to measure for a lehenga blouse, starts with this list, taken on the body in the bra you will wear: bust, around the fullest part of the chest with the tape level at the back; below bust; shoulder width across the back; sleeve length, plus the upper arm if the sleeve is fitted; front and back neck depth, as two figures; blouse length, from the highest point of the shoulder, over the bust, to the hem; and the skirt length from Step 4.
Blouse length is how long the choli is. Neck depth is how low the neckline sits, from the base of the neck or the shoulder-neck point to the lowest point, at the front and again at the back. Do not copy the front figure onto the back. For a preloved blouse, bust, shoulder, sleeve, blouse length and any spare seam help a buyer most.
Step 6: How to measure lehenga flare
How to measure lehenga flare is different, because flare, often called the ghera, is the circumference of the hem, not a measurement around your body. Agree it with a tailor as a design choice. On a finished preloved skirt, walk a soft tape around the hem, or lay the skirt as flat as you can, measure the half-hem and double it. Keep flare and cancan separate: the hem is the width, and the underskirt is the volume.
Step 7: How to measure yourself for a lehenga when you are alone, then record the numbers
How to measure yourself for a lehenga is harder at the back, the shoulders and the hem. Stand in front of a full-length mirror, keep the tape level, and take each measurement twice. Do not twist to read the tape. For shoulder, back neck and skirt length, measure a well-fitting blouse or lehenga you already own, laid flat, and label those figures as garment measurements.
Write everything on one list, with the unit and the date. If you are selling, follow sell my lehenga and list the piece on sell: waist and length for the skirt, bust, length and sleeve for the blouse, preferably in centimetres, plus the closure and any spare seam. If you are buying, compare the seller's garment measurements with a lehenga that already fits you, and with your body figures plus a little ease; size up if the blouse can be taken in. For hire, see lehenga hire.
Body, garment and what each task needs
| Buying preloved | Selling a listing | Briefing a tailor | |
|---|---|---|---|
| Waist and hips | Compare body figures with the seller's garment measurements. | Laid-flat garment figures, doubled for girth, plus the closure. | Body measurements at the line where the skirt will sit. |
| Length | Compare garment length with your waist-to-floor figure in heels. | Waistband to hem, and say if a cancan is included. | Measure in the heels you will wear, and note heel height and any cancan. |
| Choli | Garment bust, shoulder, sleeve and blouse length, not a label size. | Those garment figures, plus any spare seam. | Bust, below bust, shoulder, sleeve, neck depth and blouse length. |
| Flare | Photos, plus hem circumference if volume matters. | Hem flare if you can measure it, and whether a cancan is included. | Agree flare as a design choice, not a body measurement. |
Lehenga measurements checklist
- Soft tape, the bra you will wear, heels or a noted heel height, and one unit for every figure
- Body and garment measurements labelled separately
- Skirt waist at the wearing position, hips at the fullest point, and length to the floor in your heels
- Any cancan worn or noted when you take the length
- Choli: bust, below bust, shoulder, sleeve, front and back neck depth, blouse length
- Blouse length and neck depth recorded as different numbers
- Flare as hem circumference, if you are listing or briefing a tailor
- Closure type and spare seam noted, then checked against the size guide rather than a label